:status: new

=====================
VRRP Configuration
=====================

1. Open *System configuration* and go to the *System nodes*.

.. thumbnail:: /_images/getting-started/multi-node-operation/vrrp-add-1.jpg
    :width: 50 %

2. Select the *VRRP* button on the right-hand side.

.. thumbnail:: /_images/getting-started/multi-node-operation/vrrp-add-2.jpg
    :width: 50 %

3. Provide a name for VRRP configuration, remote IP, remote subnet mask, master node of VRPP and secondary node of VRRP.

.. thumbnail:: /_images/getting-started/multi-node-operation/vrrp-add-3.jpg
    :width: 50 %

Confirm with ``Save`` button.

4. Edit the created configuration and provide appropriate IP addresses - VRRP virtual (floating) IP, IP of VRRP master node and IP of VRRP standby node.

.. thumbnail:: /_images/getting-started/multi-node-operation/vrrp-add-3.jpg
    :width: 50 %

5. Proceed back to the *System nodes* panel and select ``Rebuild configuration``. Confirm the action when asked and wait for the task's completion.

.. thumbnail:: /_images/getting-started/multi-node-operation/vrrp-add-4.jpg
    :width: 50 %

.. thumbnail:: /_images/getting-started/multi-node-operation/vrrp-add-5.jpg
    :width: 50 %

6. Select ``Refresh`` button on the right-hand side and select all affected nodes.

.. thumbnail:: /_images/getting-started/multi-node-operation/vrrp-add-6.jpg
    :width: 50 %

.. Confirm with ``Rebuild`` button.

---------------
Disabling VRRP
---------------

1. From the list of the VRRP configurations, select the one that is to be deleted.

.. thumbnail:: /_images/getting-started/multi-node-operation/vrrp-delete-7.jpg
    :width: 50 %

.. thumbnail:: /_images/getting-started/multi-node-operation/vrrp-delete-8.jpg
    :width: 50 %

2. Trigger the rebuild of configurations (`System nodes` -> `Rebuild configuration`, then `Refresh`).