==========================
Installation
==========================

.. _installtion-network-settings:
-----------------
Network settings
-----------------

After starting the VM, connect to the console of the virtualisation solution. Login to the system with default credentials: ``nvadmin/NACVIEW``. 

.. thumbnail:: /_images/getting-started/installation/net-settings-0.png
    :width: 25 %
    
Next, chose option 1 - "Netwok settings" and provide appropriate data.

.. thumbnail:: /_images/getting-started/installation/net-settings-1.png
    :width: 25 %

.. thumbnail:: /_images/getting-started/installation/net-settings-2.png
    :width: 25 %

Confirm at the end and let system reboot.

.. thumbnail:: /_images/getting-started/installation/net-settings-3.png
    :width: 25 %

-----------------------------------------------------
System instalation via Out-of-Band management portal
-----------------------------------------------------

Open NV3's address with port 5443 (HTTPS). Login with the same credential as for console. 

.. thumbnail:: /_images/getting-started/installation/installer-1.png
    :width: 25 %

Select ``Start`` button and choose ``Master/Main installation``.

.. thumbnail:: /_images/getting-started/installation/installer-2.png
    :width: 25 %

.. thumbnail:: /_images/getting-started/installation/installer-3.png
    :width: 25 %

Accept terms&conditions and select ``Confirm installation``

.. thumbnail:: /_images/getting-started/installation/installer-4.png
    :width: 25 %

.. thumbnail:: /_images/getting-started/installation/installer-5.png
    :width: 25 %

.. thumbnail:: /_images/getting-started/installation/installer-6.png
    :width: 25 %

After finished installation, system will show summary of the system. Main interface will be available after about ~10 minutes. You can change to the main system interface with ``Dashboard`` button.